Factory-direct Pricing on 2.0mm HDPE Geomembrane

High density polyethylene (HDPE) geomembranes provide an impermeable barrier against a wide range of solids and liquids. They exhibit excellent chemical and UV resistance,impermeability, and high yield and welded seam strengths, which is widely used as the liner.(model according to the thickness of distinction, different thickness and different price) production capacity: thickness:0.1 mm -6 mm, width: 1-8 meters. It is suitable for seepage control in special industries, and is widely used for aquaculture, seepage control, reservoirs or sewage treatment ponds.Benefits of HDPE

Good physical and mechanic performance.
High tearing resistance, strong deformation adaptability
Puncture-resisting, aging resisting, ultra-violet radiation, oil and salt, and corrosion resistance.
Good adaptability to high and low temperature, non-toxicity, long service life.
Good waterproof, drainage, anti-seepage and damp proof effects.
Complete width and thickness specifications, low cost and easy installation.

HDPE is a very technical product to work with. It must be installed by certified welding technicians using specialized welding equipment to ensure performance.
Installations are temperature and poor weather sensitive.
80 mil HDPE liner is a thicker design for more aggressive subgrades.

TESTED PROPERTY	TEST METHOD	FREQUENCY	UNIT ENGLISH METRIC	VALUE ENGLISH(METRIC
Thickness Lowest individual reading	ADTM D 5199	every roll	mil(mm)	80(2.0) 72(1.80)
Density	ASTM D1503	200,000lbs(90,000kg)	g/m³（mil)	0.94
Tensile properties (each direction Strength at break Strength at yield Elongation at break Elongation at yeild	ASTM D 6692 ,Type IV Dumbbell,2 ipm (50mm/min) G.L 2.0min(50mm) G.L.1.3min(33mm)	200,000ibs(90,000kg)	lb/in-width(N/mm) lb/in-width(N/mm) % %	304(53) 168(29) 700 12
Tear Resistance	ASTM D 1004	45,000ibs(20,000kg)	Ib(N)	56(249)
Puncture Resistance	ASTM D 4833	45,000ibs(20,000kg)	Ib(N)	144(640)
Carbon Black Content	ASTM D 1063*/4218	20,000ibs(9,000kg)	%(range)	2.0-3.0
Caron Black Dispersion	ASTM D 5596	45,000ibs(20,000kg)		Note
Notch Constant Tensile Load	ASTM D 5397 Appdenix	20,000ibs(9,000kg)	hr	300
Oxidative Induction Time	ASTM D 3895 ,200℃ O2 ， atm	20,000ibs(9,000kg)	min	> 100
TYPICAL ROLL DIMESIONS
Roll Length			ft(m)	164.04（50）
Roll Width			ft(m)	19.68（6）
Roll Area			ft²（m²）	3229.17（300）
Notes
** Roll lengthe and width have a torance of ±1%
** All geomembranes have dimesional stability of ±2% when tested according to ASTM 1204 and 1204 and LTB of < -77°C when tested according to ASTM D746
This data is provided for informational purposes only. Trump Eco makes no warranties as to the suitability or the fitness for a specific use or merchantability of the products referred to, no guarantee of satisfactory results from reliance upon contained information or recommendations and disclaims all liability from resulting loss or damage. This information is subject to change without notice,